Other
Product Specifications >
DURANEL I | DURANEL
II | DURANEL III | DURANEL
IV | INDUCT A CORE | COP•R•CLAD
| COP•R•CORE
PRODUCT
SPECIFICATIONS
Duranel IV
The product DURANEL
IV can be best described as a magnetic one with two different stainless
steel types flat rolled with an aluminum core. One side being 304 stainless
and the other a 436 magnetic stainless which can be used with industion
heating units.
Thickness:
DURANEL IV is available in thicknesses from .063" to .250".
Tolerances of product same as those used by aluminum industry.
Widths:
Available to 24" wide.
Lengths:
Sheet up to 72" long. Blanks from 8-3/4" to 22-1/2" diameter
available in thicknesses up to .125".
Stainless Steel
Thicknesses:
Available with .010", .012" and .015" Type 304 stainless
steel clad on each side of aluminum core. Heavier stainless claddings
available upon request subject to approval by Engineering Department.
Tempers:
Material is available in temper equivalent to "F". Other tempers
must be submitted for approval by Engineering Department.
Availability:
Delivery approximately 6 to 12 weeks after receipt of order based upon
quantity, size, and strength of market.
