Other
Product Specifications >
DURANEL I | DURANEL
II | DURANEL III | DURANEL
IV | INDUCT A CORE | COP•R•CLAD
| COP•R•CORE
PRODUCT
SPECIFICATIONS
Duranel I
The product DURANEL
I consists of a Type 304 stainless steel clad on one side of Type 3004
aluminum alloy. The product contains the characteristics of 300 Series
stainless steel on one surface and the characteristics of 3004 aluminum
on the other. The bonded product possesses all of the outstanding characteristics
of each of the metals.
Thickness:
DURANEL I is available in thicknesses from .063" to .250".
Gauges above .250" to 1" considered upon submission to Engineering
Department. Tolerances of product same as those used by aluminum industry.
Widths:
Minimum width 3". Maximum width 24". Widths greater than 24"
considered upon evaluation by Engineering Department.
Lengths:
Sheet up to 72" long. Blanks from 8-3/4" to 22-1/2" diameter
available in thicknesses up to .156". Longer lengths considered
upon evaluation by Engineering Department.
Stainless Steel
Thicknesses:
Available with .010", .012" and .015" Type 304 claddings.
Thicker stainless steel or alternate analysis upon approval by Engineering
Department.
Tempers:
Material is available in temper equivalent to "F". Other tempers
must be submitted for approval by Engineering Department.
Availability:
Delivery approximately 6 to 12 weeks after receipt of order based upon
quantity, size, and strength of market.
